DCDC MPPT Solar Charger China Suppliers
The dual input DCDC MPPT Solar Charger could draw power from smart alternator as well as solar panel, to perform a proper
charging for service battery while you are driving.
DCDC MPPT Solar Charger are compatible with smart ECU controlled alternator (Euro 6) which delivers a variable output when they
are not needed. DCDC MPPT Solar Charger could maintain the charging with a stable output in this situation, to assure your battery
getting a fully charging in the shortest time.
It will protect or maintain your starter battery even if engine was stopped without issue of starting problems.
DCDC MPPT Charger Features
- Dual input from alternator and solar panel
- Compatible with smart alternator – Euro 6
- Multiple stages charging algorithm for lead acid battery
- Built in automatic temperature and voltage compensated battery charging
- Multiple battery chemicals including AGM, GEL, LFP(LiFePO4) etc
- Max Power Point Tracking (MPPT) technology
- Compact and Water Proof, IP65
| Model No. | LPX1225 |
| Electrical | |
| Input nominal voltage | 12 VDC |
| Alternator input voltage range (Intelligent type) | 11.6 – 16 VDC （Start-up input voltage:12V） |
| Alternator input voltage range (tradition type) | 12.8 – 16 VDC （Start-up input voltage:13.2V） |
| Automatic activation – D+ | yes |
| PV Input voltage range | 11.6-25 VDC （Start-up input voltage:12V） |
| Output nominal voltage | 12 VDC |
| Absorption voltage | AGM Battery:14.4V; LFP Battery:14.6V |
| Float voltage | AGM Battery:13.5V; LFP Battery:13.8V |
| Charge current (A) | 25 |
| Efficiency | MAX 97% |
| Temperature compensation | yes |
| Voltage compensation | yes |
| Charge algorithm | Multi stage |
| Protection | Battery charger over temperature; Battery over temperature; Over load; short circuit |
| Operating temp | -20 ℃ — + 60 ℃ |
| Enclosure | |
| Material & Color | Aluminum with anodized, flame proof plastic |
| Battery connection | M8 |
| Protection category | IP65 |
| Weight | 1.5 kg |
| Dimensions ( h*w*d ) | 60 mm x 102.3 mm x 186.3 mm |
| Standards | |
| Safety | EN60335-1,EN60335-2-29 |
| Emission | EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3 |
LI POWER (SHENZHEN) TECHNOLOGY CO., LTD.
Mobile ：+86 – 17702627150; +86 – 13632647891 Add：Rm1401, Dongfangtiande Bldg., Jinlong Rd.,
Minzhi street, Longhua district, Shenzhen, China.
Skype ：jack-lin1986
Email ：Sales@lipowertech.com
